The Bambu Lab P2S and Sovol SV08 are cross-brand rivals: both are prosumer-tier printers, listed $20 apart. Both are CoreXY printers with automatic calibration. The P2S costs $20 more and gets you an enclosed chamber (with PA-CF on its materials list) and 4-slot multicolor; the SV08 answers with 152% more build volume and an open-source design.
Early in release cycle — no urgency to wait
Best for: Serious makers and prosumers who need enclosed printing for ABS, ASA, PA, PA-CF, and PC — and want Bambu's plug-and-play experience at a prosumer price.
Full details →First-generation product — no release history to base predictions on
Best for: Klipper enthusiasts, Voron fans who want a pre-built shortcut, and makers who want maximum build volume and open-source firmware at a prosumer price — without the DIY build time of a true Voron kit.
Full details →| Bambu Lab P2S | Sovol SV08 | |
|---|---|---|
| Pricing | ||
| Starting Price | $549 | ★ $529 |
| Print Specs | ||
| Tier | Prosumer | Prosumer |
| Motion | CoreXY | CoreXY |
| Build Volume | 256 × 256 × 256 mm | ★ 350 × 350 × 345 mm |
| Max Speed | 600 mm/s | ★ 700 mm/s |
| Multicolor | ★ ✅ 4 slots | ❌ No |
| Enclosure | ★ ✅ | ❌ |
| Auto Calibration | ✅ | ✅ |
| Open Source | ❌ | ★ ✅ |
| Upgrade Kit | — | — |
| Buy Timing | ||
| Released | Oct 14, 2025 | Jun 1, 2024 |
| Cycle length | ~832 days | — |
| Cycle advice | Buy | Caution |
| Deals advice | Buy | Buy |
| Next model | P3S or next prosumer model (Expected late 2027) | — |
The P2S was released on Oct 14, 2025, 394 days ago. Based on Bambu Lab's release cadence, we expect the next model (P3S or next prosumer model) around late 2027 — about 323 days away, which puts the P2S 55% of the way through its cycle.
The SV08 was released on Jun 1, 2024, 894 days ago. It is a first-generation product, so there is no earlier cycle to predict its successor from.
On timing alone, the P2S is the safer buy right now — it is only 55% of the way through its expected cycle, while the SV08 has no release history pointing to a successor yet.
Cycle and deal status as of November 12, 2026. See the launch calendar →
The SV08 lists at $529 and the P2S at $549 — $20 apart, so the P2S costs 4% more.
Per litre of build volume, that works out to $33 for the P2S versus $13 for the SV08 — the SV08 is both cheaper and roomier, so it wins on value outright.
With both in sale windows until Dec 5, 2026, this is a good moment to buy either — compare the live sale prices before you decide.
Our pick for most buyers is the P2S, for an enclosed chamber (with PA-CF on its materials list) and 4-slot multicolor, plus a higher editor score (9.2 vs 8.1) and better buy-now timing. Go for the SV08 instead if you print large parts — its 350 × 350 × 345 mm build volume holds 152% more than the P2S's 256 × 256 × 256 mm.
How we judge timing and deals: read our methodology →
The P2S enclosure maintains a more consistent chamber temperature over the P1S, reducing warping on long ABS and PA prints.
PLA through PC — the P2S handles the entire engineering filament spectrum with reliable results.
The P-series CoreXY enclosure design strikes the best balance of price, speed, and material capability in Bambu's lineup.
7 linear rails, 4 independent Z motors with Quad-Gantry Leveling, and a flying CoreXY gantry — the core architecture of the Voron 2.4, pre-assembled and ready to print.
Ships with Klipper pre-configured with Input Shaper, Pressure Advance, adaptive mesh bed leveling, and Obico remote monitoring — no configuration required to start printing.
One of the largest open-frame CoreXY build volumes at this price tier. The AC-powered bed heats quickly and handles ABS, ASA, PC, and PA with a 300°C capable hotend.