First-generation product — recently released, still early days
Best for: Budget makers who primarily print PLA, PETG, and TPU and want a large enclosed CoreXY at $379. Not the right choice if you regularly print ABS, ASA, PA, or PC.
Full details →Overdue for a refresh — no successor announced yet. Prices should be at their lowest
Best for: Professional makers and small studios who need dual-material printing for engineering parts with soluble supports — or true dual-color without purge waste.
Full details →| Qidi Tech Q2C | Bambu Lab H2D | |
|---|---|---|
| Tier | Entry | Professional |
| Motion | CoreXY | CoreXY |
| Build Volume | 270 × 270 × 256 mm | 350 × 320 × 325 mm |
| Max Speed | 600 mm/s | 600 mm/s |
| Multicolor | ✅ 4 slots | ✅ 2 slots |
| Enclosure | ✅ | ✅ |
| Auto Calibration | ✅ | ✅ |
| Open Source | ❌ | ❌ |
| Upgrade Kit | — | — |
| Materials | PLA, PETG, ASA, TPU | PLA, PETG, ABS, ASA, TPU, PA, PA-CF, PC, PETG-CF |
| Released | Aug 20, 2025 | Nov 15, 2024 |
| Cycle length | — | ~210 days |
| Cycle advice | Buy | Wait |
| Deals advice | Caution | Buy |
| Next model | — | — |
270×270×256 mm is larger than the Bambu P2S and X1C at a fraction of the cost. The passive enclosure keeps PLA and PETG prints consistent without needing active heating.
The Q2C works with the Qidi Box multi-filament system — up to 4 units can be chained for 16-color printing, sold separately at $228 per unit.
Same rated top speed as Bambu Lab printers, placing it in the fastest tier of consumer FDM printers.
The H2D prints two materials simultaneously from two nozzles. This eliminates purge tower waste and enables true dual-material prints including PVA/PLA soluble support combinations.
350×320×325 mm gives more print area than the standard 256 mm Bambu models — suited for larger professional parts.
The H2D supports a wide range of engineering filaments including PA-CF, PETG-CF, and PC with its enclosed chamber.