Bambu Lab H2DvsPrusa Research CORE One+

💰Prusa Research CORE One+ is $400 cheaper (35% less)

📐Bambu Lab H2D has 145% more build volume

⚡Bambu Lab H2D tops out at 1000 mm/s vs 600 mm/s

⚠️ Ecosystem lock-in warning: Bambu and Prusa are not interchangeable ecosystems. Bambu's AMS system is proprietary — multicolor filaments, cloud features, and software are tightly coupled. Prusa's MMU3 is open source. Switching ecosystems later means replacing filament profiles, software presets, and accessories. Choose based on your long-term workflow, not just the current specs.

Bambu Lab H2D

Buy/Wait:Caution

First-generation product — no release history to base predictions on

Best for: Professional makers and small studios who need dual-material printing for engineering parts with soluble supports — or two-material prints with minimal purge waste.

Full details →

Prusa Research CORE One+

Buy/Wait:Buy

Early in release cycle — no urgency to wait

🔧 Upgrade kit available — from CORE One+, MK4S

Best for: Makers who want CoreXY speed and precision with Prusa's open-source ethos, community support, and long-term repairability — without Bambu's closed ecosystem.

Full details →

	Bambu Lab H2D	Prusa Research CORE One+
Pricing
Starting Price	$1,549	★ $1,149
Print Specs
Tier	Professional	Prosumer
Motion	CoreXY	CoreXY
Build Volume	★ 350 × 320 × 325 mm	250 × 220 × 270 mm
Max Speed	★ 1000 mm/s	600 mm/s
Multicolor	✅ 2 slots	★ ✅ 8 slots
Enclosure	✅	✅
Auto Calibration	✅	✅
Open Source	❌	★ ✅
Upgrade Kit	—	🔧 From CORE One+, MK4S
Buy Timing
Released	Mar 25, 2025	Aug 13, 2026
Cycle length	—	~209 days
Cycle advice	Caution	Buy
Deals advice	Buy	Caution
Next model	—	—

Quick Winner

Bottom Line

💰Prusa Research CORE One+ saves you $400 — choose it if budget is your primary constraint

🔓Prusa Research CORE One+ is the pick for open firmware, community mods, and long-term repairability

Materials

Bambu Lab H2D only

PA-CFCarbon-fibre nylon — very stiff, abrasive to standard nozzles

PETG-CFCarbon-fibre PETG — stiffer than PETG, easy to print

Both

PLAEasy to print, no enclosure needed — everyday parts

PETGTougher, slightly flexible, moisture-resistant

ABSHeat and impact resistant — needs enclosure

ASAUV-stable ABS alternative — outdoor parts, needs enclosure

TPUFlexible rubber-like — phone cases, gaskets, wheels

PANylon — strong and wear-resistant, needs dry storage

PCPolycarbonate — extremely tough, challenging to print

Prusa Research CORE One+ only

—

Why buy each?

Bambu Lab H2D

Dual nozzle — two materials, less purge

The H2D's toolhead carries two nozzles, each with its own material. Switching between them avoids most of the purge waste of single-nozzle filament changes and enables dual-material prints including PVA/PLA soluble support combinations.

Large build volume

350×320×325 mm gives more print area than the standard 256 mm Bambu models — suited for larger professional parts.

High-temp capable

The H2D supports a wide range of engineering filaments including PA-CF, PETG-CF, and PC with its enclosed chamber.

Prusa Research CORE One+

Prusa's answer to Bambu P-series

The CORE One+ matches Bambu CoreXY speed (600 mm/s) while keeping everything open source — firmware, hardware, slicing profiles.

Fully open source

Unlike Bambu's closed ecosystem, every component of the CORE One+ can be modified, repaired, or community-improved.

INDX toolchanger option

The CORE One+ (Gen 2) can be ordered with Prusa's INDX toolchanger in 4- or 8-tool versions, shipping from 15 October 2026. Each material gets its own nozzle, with about 12 seconds per material change and almost no purge waste. The MMU3 remains compatible as a 5-color add-on.